ZooHead
0
Sheetrock Screws. I don't know if there are other names for this type of screw
in other parts of the world as Sheetrock may be an American brand name.
Sheetrock screws usually have a black non reflective finish.
The tip is a problem area where so many points come together, it makes using the Optimize tool hazardous.
I wanted to build one without Subdividing, but theWrap Modifier Extrude Creator sections limit is 20 and I needed 64.
So I had to find other ways much too tedious to explain, but I'll figure a simpler method. Correction added
This one looks great but it's not watertight at the tip due to the Optimize Tool making some holes.
in other parts of the world as Sheetrock may be an American brand name.
Sheetrock screws usually have a black non reflective finish.
The tip is a problem area where so many points come together, it makes using the Optimize tool hazardous.
I wanted to build one without Subdividing, but the
So I had to find other ways much too tedious to explain, but I'll figure a simpler method. Correction added
This one looks great but it's not watertight at the tip due to the Optimize Tool making some holes.
Last edited: