Float my boat

feleti-coates

feleti-coates

0
Messages
5
Float my boat

Can anyone lend me some tips/pointers/guidance (tutorials?) on how to make a simple boat hull shape? I'm am thinking along the lines of a smal 16-30' pleasure craft type- not a sail boat. Just the hull really.

I was hoping to use a bi-rail/rail extrude but can't find any equivalent in Cheetah 4.3. Tips? Tricks? Alternative logic?

Thanks in advance...:icon_thumbup:
 
Hi.
There are so many ways to do that: Boxmodeling, spline patching via script. What do you prefer? Any sketch of your idea available, because I don´t know how a "small 16-30' pleasure craft type boat" looks like?

With kindest regards
Frank
 
This is n example of the form- without all the detail (nor the people and/or mountains).

I think I'll have to stick to box-modeling since I'm not a script-man...yet.

Thanks again.
 

Attachments

  • 535_BR.jpg
    535_BR.jpg
    57.9 KB · Views: 1,983
Hi.
No wait, man. You don´t have to write a script. There´s already a loft-script in the scripting section you can use, when you like to use splines for that: http://www.cheetah3d.de/forum/showthread.php?t=1327

Further help needed?

Here´s a 5MB video of about 5min starting up the boat via boxmodelling.
I can send it by request.

Cheers
Frank
 

Attachments

  • PleasureCraftBoat.jpg
    PleasureCraftBoat.jpg
    104.9 KB · Views: 1,957
Last edited:
Oh- you beauty- after I got the script installed properly (didn't know it had to be placed in one the pre-existing folders in the script folder)- it ran like a charm. And it works with multiple polygons so I get exactly the form I want in the hull.

Thanks Frank.

Now if only "they" could make a bevel script?
 
Hi.
Ok. I like to see some progress on that ;)

(The pre-existing folders won´t be overwritten by Cheetah3d-updates.)

With kindest regards
Frank
 
Thanks- I think I figured it out with your loft.js script. Will come in handy in the future. Just wish you could control the divisions in one direction. Here is the finished result- finished enough to move it along to another program. It is only a conceptual model of a boat to be used in an even larger model of a boat show room and trade show.

Thanks again for the help.

Dave
 

Attachments

  • boat.jpg
    boat.jpg
    12.8 KB · Views: 1,929
  • boat2.jpg
    boat2.jpg
    12.7 KB · Views: 1,909
Boat video?

Hi,

I am an extreme noob, having just d/l'd C3D to see if I can learn it to model a boat. So far, I don't seem to be able to do much of anything, but I am sure that watching a video would be a huge help. Can you email that to me? I think I have enabled my account to allow emails to be sent.

Thanks,
- Gardner

frank beckmann said:
Hi.
No wait, man. You don´t have to write a script. There´s already a loft-script in the scripting section you can use, when you like to use splines for that: http://www.cheetah3d.de/forum/showthread.php?t=1327

Further help needed?

Here´s a 5MB video of about 5min starting up the boat via boxmodelling.
I can send it by request.

Cheers
Frank
Click to expand...
 
Sorry if this too simple a question, but how does the Loft script tool work? I think I might be missing the obvious...
 
Hi.
The goal is to generate some pathes (in Cheetah3d or an vector drawing app), line them up and use Todd´s script to build a skin from spline to spline.
I attached a simple example.

With kindest regards
Frank
 

Attachments

  • LoftExample.jpg
    LoftExample.jpg
    46.8 KB · Views: 1,039
  • LoftExample.jas.zip
    11.9 KB · Views: 955
frank beckmann said:
Hi.
The goal is to generate some pathes (in Cheetah3d or an vector drawing app), line them up and use Todd´s script to build a skin from spline to spline.
I attached a simple example.

With kindest regards
Frank
Click to expand...
I get it now. Thanks a lot, Frank, very nice of you.:smile:
 
Hey Frank,

I would also like to watch your video. Can you email it to me?

Thanks,

Mat
 
I might as well jump on the bandwagon Frank. I would like the movie just for my own education.

Thanks,
 
You must log in or register to reply here.
Back
Top